Insulated Glass
We
can insulate a variety of glass types that will optimize their thermal
performance as well as enhance their
structural beauty. When it comes to insulated glass, we can give you
exactly what you need and go that extra mile to follow it through all
the way to the finish.
Our Lisec insulated glass line is IGCC certified and state of the art.
We dual-seal our IG units, using an aluminum spacer, a polyisobutilene
primary sealant and a polysulfide secondary sealant. We can also
silicone seal IG units for “butt-glaze” applications. These units
include a 10-year non-prorated warranty against seal failure. We can
also supply IG units with colonial muntin bars. These muntin bar units
include a full 5-year warranty.
Specialty
patterned units, Argon gas filled units, and the newest state of the
art Low-E coated glass units are also available, enabling you to meet
any requirement you may encounter.
We have the capability
to produce units that will cover all applications using a variety of
glass types and colors, in quantities large and small.
 Monolithic glass is loaded and cleaned in a vertical glass washer |
 Washed glass then automatically feeds to the spacer application station |
 Automated spacer bender bends all corners, drills holes for muntins and argon gas holes. |
 Aluminum spacer with the primary polyisobutyllene seal is applied to the glass. |
 IG unit then feeds into the ceiling robot which automatically applies the secondary polysulfide sealant around the perimeter of the unit. |
 Glass then enters the press where both lites are matched up and pressed together to form the insulated unit. |